GENISOM / Mobile robotics

GENISOM M1

GENISOM M1 is a mobile robot platform with leg and wheel modes, IP67 protection and a manufacturer-listed continuous payload of 30 kg. Discuss your project with MALONI.

Enquire about a model at MALONI ↗Discuss selection by phone

GENISOM M1 — manufacturer product visual — GENISOM product visual. Equipment and leg or wheel configuration are confirmed in the offer.

Manufacturer-listed weight: ≈30 kg · Legged configuration, without battery; laboratory specification.
Standing dimensions (L × W × H): ≈93 × 48 × 58 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Lying dimensions (L × W × H): ≈93 × 63 × 20 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Manufacturer-listed payload: 30 kg · Continuous payload from the technical table; laboratory conditions.
Legged walking speed — technical table: >4 m/s · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Wheeled driving speed — technical table: >8 m/s · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Endurance — manufacturer test conditions: >3.5 h · With load; the table does not specify the load mass or duty cycle.
Battery capacity: 20 Ah · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Climbable step height: >25 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Maximum obstacle height: 80 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Operating temperature: −20–55 °C · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Ingress protection: IP67 · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Power interface: 5 / 12 / 24 / 48 V; 480 W · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.
Communication interfaces: Gigabit Ethernet / USB / Serial · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.

Use, delivery and support

Documented details refer to the stated materials and their review date. Suitability for your task and the binding delivery scope are confirmed in a specific quotation.

Suitable use

Catalogue focus and configuration: GENISOM M1 is a mobile robot platform with leg and wheel modes, IP67 protection and a manufacturer-listed continuous payload of 30 kg. Discuss your project with MALONI.

No separate detail is documented for this area.

Confirm individually

Describe the teaching or research task, team experience, workspace and required software interfaces. Define the task, environment, operator experience and expected outcome. Catalogue positioning alone does not establish suitability for a particular site.

Limitations

Documented in source materials

Manufacturer-listed weight: ≈30 kg · Legged configuration, without battery; laboratory specification.Source review: 2026-11-04
Standing dimensions (L × W × H): ≈93 × 48 × 58 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Lying dimensions (L × W × H): ≈93 × 63 × 20 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Manufacturer-listed payload: 30 kg · Continuous payload from the technical table; laboratory conditions.Source review: 2026-11-04
Legged walking speed — technical table: >4 m/s · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Wheeled driving speed — technical table: >8 m/s · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Endurance — manufacturer test conditions: >3.5 h · With load; the table does not specify the load mass or duty cycle.Source review: 2026-11-04
Battery capacity: 20 Ah · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Climbable step height: >25 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Maximum obstacle height: 80 cm · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Operating temperature: −20–55 °C · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Ingress protection: IP67 · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04

Confirm individually

Check loads, workspace, safety and an acceptance test for the complete application. Specifications of one variant do not automatically apply to another. Agree a sample task, compatible software, delivery scope and documentation for the selected configuration.

Package contents

No separate detail is documented for this area.

Confirm individually

Request an itemized list: model and controller, power supply, batteries, tools, peripherals, licences and documentation. Photographs and compatible accessory lists do not establish package contents.

Programming

Documented in source materials

Power interface: 5 / 12 / 24 / 48 V; 480 W · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04
Communication interfaces: Gigabit Ethernet / USB / Serial · Manufacturer laboratory specification; actual results depend on configuration and operating conditions.Source review: 2026-11-04

Confirm individually

Confirm SDK/API access, supported software versions, licences, control access and any MALONI development work. An available interface does not mean programming is included.

Availability

No separate detail is documented for this area.

Confirm individually

Confirm the exact variant, quantity, destination, shipping and delivery date in the quotation. A published catalogue does not establish stock availability.

Support

No separate detail is documented for this area.

Confirm individually

Agree training, contact point, remote or on-site support, service, spare parts and warranty terms. Scope, price and response times require confirmation; MALONI services and manufacturer commitments are assessed separately.

Education and research teams needing a mobile platform for navigation, mapping or manipulation.

Discuss this model’s suitability ↗

01 / M1

Application and development

Mobile robotics and inspection development with carried equipment. Confirm the terrain, control method and leg or wheel configuration for the intended task.

02 / M1

Configuration for your project

The brochure describes leg/wheel switching and dual hot-swappable batteries. Confirm the delivered wheel kit, batteries, charging equipment and software in the offer. The pictured wheeled configuration does not establish package contents.

Model questions

M1: what is the listed manufacturer-listed weight?

The listed value is ≈30 kg. Source: Supplied GENISOM product brochure. This describes the listed model; confirm your required configuration when requesting a quote.

M1: what is the listed standing dimensions (l × w × h)?

The listed value is ≈93 × 48 × 58 cm. Source: Supplied GENISOM product brochure. This describes the listed model; confirm your required configuration when requesting a quote.

M1: what is the listed lying dimensions (l × w × h)?

The listed value is ≈93 × 63 × 20 cm. Source: Supplied GENISOM product brochure. This describes the listed model; confirm your required configuration when requesting a quote.

Before choosing M1

Model, controller and exact configuration; specifications of another variant do not automatically apply.
SDK, operating system and ROS versions supported for the intended task.
Kit contents: the robot, tool, camera, chassis and teaching materials may be separate items.

A teaching or research demonstration does not validate a complete operational application. Confirm integration, safety, software availability and support for the specific setup.

Discuss programming and integration →

Technical support and service →

Sources and data verification

Data source: Supplied GENISOM product brochure

Document / revision: Genisom M1_1230.pdf

Source review date: 2026-11-04

Manufacturer catalogue information is not an independent MALONI test. Current configuration, availability and delivery scope are confirmed on request.

Request technical documents →

Back to category Enquire about a model at MALONI